KINGSOUND M-03 Portable Transistor Amplifier Black

KINGSOUND M03 Portable Transistor Amplifier Black

KINGSOUND

M-03-B

New

Can you imagine the power of electrostatic on the go? Now you don’t need! We have the pleasure to announce our first portable electrostatic amplifier. These beauties can deliver the magic of electrostatic wherever you are.

More details

Can you imagine the power of electrostatic on the go? Now you don’t need! We have the pleasure to announce our first portable electrostatic amplifier. These beauties can deliver the magic of electrostatic wherever you are.

 

With a 13 hours battery life, you can play your favorite’s tracks everywhere. And the best thing you can use a wide range of headphones. Our amplifier is even compatible with the others electrostatic headphones.

 

But if you are looking for the best experience you can use the Kingsound KS-H2 and the Kingsound KS-H3 and listen to the best music on the go. Also it is fully compatible and optimized to work with the brand new Kingsound KS-H4.

 

How does it works?

 

The electrostatic loudspeaker is very simple in concept, but difficult to construct successfully in practice. lts operation relies on electrostatic attraction and repulsion, in much the same way as a piece of thin paper attracted to a rubber balloon that is charged by rubbing it against fabric.

 

The electrically charged ultra-thin conductive film diaphragm is tensioned and placed close between two metal grids.  When a high voltage audio signal is applied to the metal grids, the diaphragm moves in response to the signal, moving towards the grid which at that instant is oppositely charged, and away from the grid which has the same charge as the diaphragm. The diaphragm responds in an essentially linear manner, producing sound waves which are a very accurate reproduction of the original sound.

 

Why is it better?

 

Imagine a normal speaker as a point source, from which the sound waves produced diffract at a great angle. This causes rapid decrease in volume and quality over a short distance. Then imagine a flat electrostatic panel producing sound from the same input signal. This time the sound waves are produced over a large, flat area, therefore have very little diffraction and the volume decreases much less over the same distance.

 

The electrostatic stereo system is the pinnacle of audio reproduction. The standard upon which all other stereo headphones can be measured. It literally pushes the limits of the world's most sophisticated instruments that attempt to measure its performance. The result is an experience that no other stereo system can approach. The result is an ultra-flat frequency response across the entire range: deep, clean bass with real power that other attempts at electrostatic transducers can only envy.

 

Technical caracteristics:

  • Frequency Response: 2Hz - 24kHz (90Vrms/output)
  • Input Impedance: 20k
  • Rated Input Level: 0.3V (analogue)
  • Max. Output Voltage: 300Vrms (ESL) / 3V vrms-1k (Output 3.5mm) / 125mW-32k (Output 3.5mm)
  • Signal to noise ratio: 112dB
  • Harmonic Distorsion: 0.01% (à 100Vrms / 1kHz output)
  • Gain: 60dB (ESL) /34dB (Output 3.5mm)
  • DC5V12A (output) : 6200mAh (also a USb power bank)
  • Autonomy: 13 hours

Physical caracteristics:

  • Dimension (mm): 120 x 80 x 30
  • Weight: 0.45kg

No customer comments for the moment.

Write a review

KINGSOUND M03 Portable Transistor Amplifier Black

KINGSOUND M03 Portable Transistor Amplifier Black

Can you imagine the power of electrostatic on the go? Now you don’t need! We have the pleasure to announce our first portable electrostatic amplifier. These beauties can deliver the magic of electrostatic wherever you are.

Write a review